How to install Namalsk on your Dayz Standalone Server Print

  • 14

This guide will help you on how to install Namalsk on your server.

 

!!! WARNING - READ BEFORE INSTALL !!!

Always install the Namalsk first and test the server before adding any other mods, if you already have other mods installed and the server doesn't work, remove all mods and install Namalsk first, test, then install the other mods one by one, also be aware that some other mods might not be compatible with Namalsk.

 

  1. Stop your server
  2. Click Steam Workshop (blue) button, search and install the following mods in this exact order
    1. CF
    2. Namalsk Island
    3. Namalsk Survival
  3. Press the Map Packs button on your control panel and install the Namalsk maps
  4. Press Configuration Files button and edit Config.cfg file with EASY EDITOR option, scroll down to Mission Template field and select: regular.namalsk or hardcore.namalsk
  5. Still, inside Config.cfg file, adjust the regular or hardcore settings respectively, check below the recommended settings for each mode.
  6. Start your server

 

RECOMMENDED SETTINGS FOR REGULAR NAMALSK

  • Enable 3rd Person
  • Enable Crosshair
  • Enable Personal Light

RECOMMENDED SETTINGS FOR HARDCORE NAMALSK

  • Disable 3rd Person
  • Disable Crosshair
  • Disable Personal Light

 

If you have any questions or you need our help don't hesitate to contact our support system.

 

You can buy DayZ Standalone Server Hosting Here


Was this answer helpful?

« Back